From 171fa9d7a9d70c6f820bbaffb2d04452fb14d6a8 Mon Sep 17 00:00:00 2001 From: Michael Shulman Date: Fri, 8 May 2020 09:53:03 -0700 Subject: [PATCH] Update README (#86) Clarify when to boot device. Fix typo --- README.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 2507e72..6be50f2 100644 --- a/README.md +++ b/README.md @@ -47,7 +47,8 @@ This software is in active development. To see the current development status, [ # Setup ## Getting the Raspberry Pi Zero W ready 1. After [flashing Raspbian Buster (with Desktop)](https://www.raspberrypi.org/downloads/raspbian/), set up Wifi on the Raspberry Pi Zero W by copying the file [**wpa_supplicant.conf**](https://github.com/aceisace/Inky-Calendar/blob/installer/wpa_supplicant.conf) (from above) to the /boot directory and adding your Wifi details in that file. -2. Create a simple text document named **ssh** in the boot directory to enable ssh. +2. Create a simple text document named **ssh** in the boot directory to enable ssh. +3. Install the SD card and boot your Raspberry Pi. Connect to it over the network with ssh and login. 3. Expand the filesystem in the Terminal with **`sudo raspi-config --expand-rootfs`** 4. Enable SPI by entering **`sudo sed -i s/#dtparam=spi=on/dtparam=spi=on/ /boot/config.txt`** in the Terminal 5. Set the correct timezone with **`sudo dpkg-reconfigure tzdata`**, selecting the correct continent and then the capital of your country. @@ -74,7 +75,7 @@ If the Installer should fail for any reason, kindly open an issue and paste the

-## Adding details to the programm +## Adding details to the program When you run the installer, you can add details in the last step. For new-users, it is recommended to use the 'web-UI' option. You can also manually edit the settings file like this: `nano /home/$USER/Inky-Calendar/settings/settings.py`