iicd/Inkycal
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added instructions for 12.48" and swap on Rpi Zero

Browse Source
This commit is contained in:
Ace 2023-08-27 16:21:41 +02:00 committed by GitHub
parent 445073d3e4
commit 58dad53a97
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 14 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@ -81,6 +81,20 @@ on your smartphone. Use the address: `inkycal.local` with the username and passw
sudo raspi-config --expand-rootfs
sudo sed -i s/#dtparam=spi=on/dtparam=spi=on/ /boot/config.txt
sudo dpkg-reconfigure tzdata
# If you have the 12.48" display, these steps are also required:
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz
tar zxvf bcm2835-1.71.tar.gz
cd bcm2835-1.71/
sudo ./configure && sudo make && sudo make check && sudo make install
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
# If you are using the Raspberry Pi Zero models, you may need to increase the swapfile size to be able to install Inkycal:
sudo dphys-swapfile swapoff
sudo sed -i -E '/^CONF_SWAPSIZE=/s/=.*/=256/' /etc/dphys-swapfile
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
```
These commands expand the filesystem, enable SPI and set up the correct timezone on the Raspberry Pi. When running the last command, please select the continent you live in, press enter and then select the capital of the country you live in. Lastly, press enter.
7. Follow the steps in `Installation` (see below) on how to install Inkycal.